Peg-Perego VIAGGIO 1 Via, Инструкция по эксплуатации

Страница: 19 / 32

19
2
5
1
3
4
EN• Spare parts available in different colours to be specified
when ordering.
CN•
提供多种颜色的配件以满足各种需要
Viaggio 1-2-3 Via
1) BRI12300*
2) BSC12300*
3) BSA12300*
4) BCU12300*
5) BSP12300*
EN_English
Thank you for choosing a Peg-Perego
product
GENERAL WARNINGS
•
Carefully read the instructions before use and
keep them in a safe place for future reference.
Failure to thoroughly follow the instructions for the
installation of the car seat could expose your child
to serious hazards.
• Viaggio 1-2-3 must be assembled and installed by
adults. The car seat must be assembled and installed
when the child is not seated in it.
• When travelling, never hold your child in your arms or
allow him to sit outside the car seat.
In the event of sudden braking, even at low speeds, the
child might easily be flung forward.
• Do not insert fingers into the mechanisms.
• When travelling take special care to make sure that
luggage or other objects do not injure the child sitting
in the car seat in the case of an accident.
• Do not use installation methods other than those
recommended because they could cause the
detachment of the car seat.
• Never leave your child unattended in the car seat:
watch him/her even when s/he is sleeping.
• Never remove the child from the seat when the car is
moving.
• Check that the child car seat is not blocked by a
moving part of the seat or a door.
• Adjust the height and tension of the belts, checking
that they adhere to the child’s body without being too
tight. Check that the safety belt is not twisted and the
child cannot unfasten it.
• This car seat is designed only for short naps.
• Do not leave the car seat in the car if exposed to direct
sunlight, because some parts could overheat and cause
injuries to the delicate skin of your child. Verify that the
seat is not too hot before seating your child.
• Do not use the child car seat without the lining. This