Peg-Perego Pliko Switch, Руководство пользователя

Страница: 13 / 16

- 13 -
hands until you hear two clicks confirming that
it has locked into position. Ensure the seat is
correctly secured by attempting to pull it upwards
by gripping the front bar.
12 REMOVING THE SEAT FROM THE CHASSIS:
Hold down the two round buttons on the sides
of the seat (fig_a), press the two levers under the
armrests (fig_b) and pull up the seat (fig_c) until it
is released.
13 FRONT BAR: Before attaching the front bar, press
the buttons on the sides of the armrests and
remove the caps (fig_a). To attach the front bar,
guide the connections into the armrests and push
towards the seat until they click into place (fig_b).
To remove the front bar, press the two buttons
and pull it out (fig_c). To make it easier for the
child to get in and out, it is possible to open the
front bar on one side only. If you wish to use the
stroller without the front bar, put the caps back in
the armrests.
14 BACKREST: to recline the backrest lift the lever
(fig_a) and choose one of the 4 positions (fig_b).
15 FOOTREST: to lower the footrest push the two
levers downwards and then push the footrest
downwards (fig_a); to raise the footrest lift it
upwards (fig_b).
16 FIVE POINT SAFETY HARNESS: To fasten
it, push the two waist strap buckles (with the
shoulder straps attached – arrow_a) into the leg
divider until they click into place (arrow_b). To
unfasten it, press the round button in the centre
of the buckle (arrow_c) and pull the waist straps
out (arrow_d).
17 To tighten the waist strap, pull on both sides in
the direction of the arrow (arrow_a). To loosen it
do the opposite. The waist strap can be tightened
as far as the safety lock (fig_b).
18 To adjust the height of the safety harnesses,
release the two buckles on the rear of the
backrest.
Pull the shoulder straps towards you (arrow_a)
until the buckles are released and insert them
in the backrest loops (arrow_b). Remove the
shoulder straps from the sack (arrow_c) and
insert them in the most appropriate loop
(arrow_d), then re-attach the two buckles on the
rear of the backrest (arrow_e) The buckles are
securely attached when a click is heard (fig_f).
19 HOOD: to attach the hood insert the connections
into the sides of the seat (fig_a) and then fasten
the buttons on the rear of the backrest (fig_b).
To remove the hood: disengage the connections
and unbutton from the backrest. To raise the
hood: pull it towards you; to close the hood: push
it back. To convert the hood into a sun canopy,
open the double zipper (fig_c) and unfasten the
buttons on the rear of the backrest. The child’s
favorite toy can be hung from the loop on the
hood (fig_d).
20 COVER: Fit the cover on and fasten the buttons
under the leg rest (fig_a) and on the sides of it.
For the baby carriage version, raise the leg rest,
put the cover over the front bar (fig_b) and fasten
it with the buttons on the hood (fig_c).
21 For the stroller version, lower the footrest, insert
the cover underneath the front bar (fig_a) and
secure it according to the model purchased A, B.
22 Switch On Track COVER:: this can be used with
and attached to both the Navetta XL and the
Switch On Track stroller. To fit it on the Navetta
XL, consult its user manual. To fit it on the stroller,
open up the cover inside to make room for the
child’s legs (Fig. a). Put it into position. Cover the
front bar, fasten the buttons on the front (Fig. b)
and insert it under the leg rest (Fig. c).
23 RAIN CANOPY:Before the rain cover can be fitted you
will need to attach the hood as shown on page 12.
Zip the rain cover onto the hood (A).
Pull the front of the cover down over the leg rest of
the seat. Fasten the press studs on the sides of the
rain cover to the studs on the sides of the hood (B).
When entering a building or between rain showers
the front of the rain cover can be lowered by
unzipping it from the hood (C).
Regularly check that the child is not becoming over
heated in warm weather when using the rain cover.
24 FOLDING UP: The stroller can be folded without
the seat, with the seat facing the person pushing,
or with the seat facing forwards. If the seat is
facing the person pushing: before folding it, lower
the backrest completely. If the seat is facing
forwards: before folding the stroller raise the
backrest, then lower it once the stroller is folded.
To fold the stroller, set the front wheels to their
fixed position and close the hood (if fitted).
Lift the two levers on the handles one at a time
until they click, push downwards to release the
side tubes (fig_a-b) and pull the central handle
upwards (fig_c) until the safety catches engage
(fig_d).
25 TRANSPORT: the stroller can be carried by the
central handle, keeping the front wheels fixed
(fig_a) or by the side handle (fig_b).
26 REMOVABLE COVERS: Pull the fabric covering
off the ledge (fig_a), release the attachments
of the fabric covering from the armrests (fig_b),
unfasten the buttons on the sides of the backrest
(fig_c) and remove the leg divider strap from
above by pushing it from under the seat (fig_d).
SUREFIX SYSTEM
27 Surefix is a fast and practical system that allows
you to attach the Navetta or PrimoNido bassinet
unit, the Primo Viaggio car seat or the Switch seat
to the Surefix Base of the chassis in one quick
step.
Place the item on the Surefix Base and press
down with both hands until it clicks into place.
Always apply the chassis or stroller brake before
attaching and removing products (refer to the
respective instruction manuals).
Check that the child transport unit is properly
attached.
SERIAL NUMBERS
28 Switch reports information as at the date of
manufacture of the product.
_ Product name, date of manufacture and serial
number of the seat (fig_a) and of the carriage
(fig_b).
This information is required for any complaints.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged and
continuous exposure to bright sunlight may
give rise to colour changes of various different
materials; store this product in a dry place.
CLEANING THE CHASSIS: periodically clean
all plastic parts with a damp cloth. Do not use
solvent or similar cleaning products; keep all