CHECK THE CONTENTS!
READ THE INSTRUCTIONS!
Check that all contents of the kit
are supplied and in good condition.
Make sure you have a clean work
area. It is recommended you use a
drop sheet so that your work does
not scratch the cabinet.
Designed
by
Russell
Storey
-
Stones
Sound
Studio
-
www.wes
.net.au
WES Components
90 Paramatta Rd Summerhill 2130
PH (02)9797-9866
Instruction Sheet
XLS1002
XLS1000
is shown here with its S200W amplifier and hole in cabinet to suit.
is without a hole for the S200W amplifier. This box
requires either a hole cut into it to suit your choice of inbuilt
amplifier or requires speaker cable access via a small hole or our
J706 recessed single speaker socket. We would suggest you
locate this on the bottom of the box for an attractive concealment.
Once you have taken the box out of the packaging, you should
make a decision on the box orientation that you desire. This is
whether you want the Amplifier and/or wood feature panel to the
LEFT or to the RIGHT of the front driver. Once this choice is
made you will know which side is the bottom and thus where to
put the feet which require holes to be drilled to affix.
LOOK HERE!
READ ME!
IMPORTANT!
For an improved, tight bass response it is highly recommended that you attach some heavy-duty spiked feet to the XLS1000.
For our recommended SPIKE35, a 5mm hole is drilled on all 4 corners (in about 5 to 7cm from the edge). A nut and bolt is used to affix
the feet, so it is recommended that you do the feet first, for easy bolt access and for better box stability when installing the drivers, etc.
5cm
5mm Drill Bit
Peerless XLS1000
XLS1000 - No Amplifier Hole. Blank.
XLS1002 - Includes S200W Amp & Hole.
Both units are identical other than
the amplifier being supplied or not.
Please follow instructions carefully
for best results. Please take care as
not to scratch the Piano finish paint.
Spiked feet are recommended.
eXtra Long Stroke
Peerless Sub Woofers
XLS
Contents XLS1000 & XLS1002 Kit:
CAB1000-xx
Cabinet
With Wood Feature Panel
S200W
200Wrms Sub-Amp (XLS1002)
Gasket Tape
Approx' 2 metre
Spiked Feet
SPIKE35 x4
.
(xx=Colour Code)
With Black Speaker Grill
Woofer 12"
830500 Peerless XLS Sub
Passive 12"
830548 Peerless XLS Sub
Screws x20
STS8B (8mmx25mm)
OPTIONAL:
ESSENTIAL FOR STABLE BASS PERFORMANCE
RIGHT
or
LEFT
