ISSUED: 02-04-00 SHEET #: 024-9004-1 08-10-04
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
2 of 2
E
Fasten all four screws (
C
) tight, untill
wall plate (
A
) is flushed with wall.
Push toggler (
D
) through hole. Pull screw (
C
)
back untill toggler (
D
) hits the inside of the
metal stud.
Place screw (
C
) through wall plate (
A
).
Partially fasten the toggler (
D
) to the
back of the screw. Pivot ends of toggler
(
D
) 90°.
Use wall plate (
A
) as a template to mark
slot centers on stud centers.
∅
3/4"
(19 mm)
Drill four 3/4" (19 mm) dia. holes through
drywall and studs. Insert togglers (
D
) as
shown to the right...
D
D
C
A
A
C
D
A
C
D
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
• Make sure that mounting screws are anchored into the
center of the studs. The use of an "edge to edge" stud
finder is highly recommended.
WARNING
A
