ISSUED: 08-12-91 SHEET #: 029-9004-8 12-14-05
Visit the Peerless Web Site at www.peerlessmounts.com
For customer service call 1-800-729-0307 or 708-865-8870.
4
of
4
C
B
G
Insert key into lock plug (
G
). Attach TV/upper
tray (
C
) to lower tray (
B
) as shown.
Slide upper tray (
C
) back until fully engaged. Firmly
hold in position while you insert and tighten lock plug
(
G
), several turns, until fully engaged.
Note:
To remove key, slot must be in the horizontal
position. This may require that you back off 1/4 turn.
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
C
G
Turn TV upside down on flat stable surface. Using
uni-clips (
I
) and M5 screws (
H
) (see instruction
card in fastener pack), or 3/4 particle board
screws (
E
) and washers (
F
) (for attachment to
mounting bosses if present), or a combination of
both attach upper tray (
C
) to TV bottom. Attach at
four places as close to the four corners of the TV
bottom as possible.
C
E
I
H
F
Attach lower tray (
B
) to wall arm (
A
) using four
1/4-20 x 3/8 phillips screws (
D
). Tighten securely.
B
D
A
• Always use an assistant or mechanical lifting equip-
ment to safely lift and position the plasma television.
WARNING