ISSUED: 09-11-91 SHEET #: 124-9004/D 12/27/99
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
2 of 2
D
E
A
A
J
K
2
2
2
2
2
3
3
3
3
3
L
A
B
G
H
A
A
3.1
3.1
3.1
3.1
3.1
3.2
3.2
3.2
3.2
3.2
F
Flip VCR upside down and remove the four outermost screws that attach bottom pan to VCR. Note: Do not remove pan when
removing the screws! Position upper tray (A) so that the holes on tray align with holes on VCR. Attach tray to VCR using four #6
phillips screws (D) and washers (E).
Alternative Installation: Flip VCR upside down and sec-urely attach four adhesive studs (J) to corners of VCR as shown. Before
adhering studs to VCR be sure each stud will penetrate a hole in the random perforated hole pattern on upper tray (A)!
Place upper tray (A) on VCR as shown. Attach studs to tray using four nylon nuts (K) and 1/4" washers (L). Hand tighten nylon
nuts!
(VCR has been omitted from illustration for clarity.)
Slide upper tray (A) with mounted VCR onto lower tray
(B) a shown.
Model 233 & 312 - Insert M5 penta-pin screw (F) using
penta-pin tool into upper tray (A) as shown.
Model 233K - Install lock plug (G) and lock key (H)
into upper tray (A) as shown.
Note: Use lock key (H) to turn
(clockwise) the lock plug (G) in lock
barrel. Securely tighten - key must
be in horizontal position to be
removed.
© 2001 Peerless Industries, Inc. All rights reserved.
Peerless is a trademark of Peerless Industries, Inc.