2 of 4
ISSUED: 06-23-03 SHEET #: 009-9021-7 02-13-07
Description
Qty. Part #
A
top shelf (displays Peerless logo)
1
009-1049
B
middle shelf
1
009-1035
C
bottom shelf
1
009-1034
D
legs
4
009-1041
E
carriage bolt
24
520-1220
F
hex nut
24
530-1026
G
washer
24
540-1047
H
4” casters without brakes (not shown)
2
560-0082
I
4” casters with brakes (not shown)
2
560-0083
J
Cord Wrap - Clip (JCT WB44E only)
1
009-1168
K
15' Extension Cord (JCT WB44E only)
1
600-1011
L
phillips screw (JCT WB44E only)
2
520-1219
M
wingnut (JCT WB44E only)
2
530-1025
N
rubber mat
1
009-1167
Parts List
Note:
Read entire instruction sheet before you start installation and assembly.
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer service at 1-800-729-0307.
• This product should only be installed by a qualified professional.
• Unit should be moved by authorized adults only.
• Prior to moving tables, place all AV equipment materials on lowest shelf possible. Secure heavy or bulky equipment
to table with safety belts.
• Disconnect all electrical cords from wall outlets and secure to equipment on table.
• Unlock all casters, push mobile table from the narrow side of unit only. Never pull.
• Avoid rough or uneven flooring and remove any obstacles in your path.
• Apply force to the narrow side. Do not pull the unit.
• When set up for stationary use or when loading or unloading equipment, books, etc., always secure the casters
before doing so.
• When using the table as an equipment stand, the equipment should be put on the lowest possible shelf that will still
allow the equipment to operate correctly. The equipment should be placed in the center of the shelf it is sitting on.
• The product should not be used as a stool or a ladder.
WARNING
Some parts may appear slightly different than illustrated.
D
D
F
G
M
J
E
A
B
C
LOGO
L
K
N
