ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
2 of 5
wood joist
ceiling
A
Attachment to a Wood Joist. Use a stud finder to locate
ceiling joist. Drill two 5/32" (4mm) dia. holes 2.5"
(65mm) deep into joist center. Attach projector mount
ceiling plate (A) using #14 x 2.5" (6mm x 65mm) wood
screws (B).
CAUTION: Tighten wood screws so ceiling plate is
firmly attached. But DO NOT TIGHTEN WITH EXCES-
SIVE FORCE! Overtightening can cause stress damage
to wood screws, greatly reducing their holding power!
Tighten to 80 in. lbs. (9 N.M.) maximum torque.
BE SURE TO DRILL INTO JOIST CENTER!
Skip to Step 4
THESE CONCRETE ANCHORS ARE
FOR DIRECT ATTACHMENT TO LOAD
BEARING CONCRETE ONLY! NOT FOR
ATTACHMENT TO CONCRETE CEILING
COVERED WITH PLASTER, DRYWALL,
TILE OR OTHER FINISHING MATERIAL!
USE ONLY RAWL
TM
#5005 OR HILTI
TM
HL814 CONCRETE EXPANSION ANCHORS
[.312 x 1.625 (8mm x 41mm)]. Order
accessory kit #ACC200.
concrete
ceiling
concrete
anchor
CONCRETE ANCHOR INSTALLATION
Concrete
Anchor
A
Attachment to a Concrete Ceiling.
NOTE: Concrete anchors are sold separately.
Order accessory kit #ACC200.
Drill two 5/16" (8mm) dia. holes 1.75" (45mm)
deep. Attach projector mount ceiling plate (A)
using two concrete anchors.
Tighten to 80 in. lbs. (9 N.M.) maximum torque.
See also CONCRETE ANCHOR INSTALLATION
below. Skip to Step 4
CROSS SECTION
A
Tighten to 80 in.
lbs. (9 N.M.)
maximum torque.
∅
5/32"(4mm)
ceiling
∅
5/16"(8mm)
B
