manualshive.com logo in svg

peerless-AV XTREME XHB553, Руководство пользователя, Страница: 22 / 28

Поделиться
Скачать
peerless-AV XTREME XHB553 Скачать руководство пользователя страница 22

22

2020-11-13    #:180-9149-6    (2021-11-02)

Navigating the On-Screen Menu

Navigate

Enter

Exit

Return

OK

MENU

EXIT

OK

MENU

EXIT

OK

MENU

EXIT

OK

EXIT

TV/SPK

1

3

2

4

6

5

7

•

9

LAST

8

0

OK

MUTE

VOL

MENU

CH

INFO

INPUT

EXIT

Setup

Network Information

Allows the user to get a visual readout of the IP information that the display 

has been issued. Display default is DHCP (IP Information can be viewed 

through the web page).

(Information Only)

Sensor Information

Allows the user to get a visual readout of the sensors with the display that 

are used for monitoring the health and wellness (Sensor Information can be 

viewed through the web page).

(Information Only)

Peerless-AV Technical Support

Allows the user to see model number, serial number, and firmware revision.

(Information Only)

Restore Factory Default

Allows the user to set the display to factory default settings.

Yes / No

peerConnect

Allows the user to set the display to react to CEC (Consumer Electronic 

Control) for ease of navigation when using a source that complies with the 

CEC standard.

On / Off

Auto Source Switching

Allows user to set the display to search for a content signal if the signal on the 

main source ceases.

On / Off

Priority Source Recovery

Allows the user to initiate the display to look for a specific input defined by 

“Primary” and “Secondary”; If the Primary source is removed, the priority 

becomes what is chosen as “Secondary”.

On / Off

Primary Source

Allows the user to indicate the main source input.

AV / DP / HDMI 1 /  

HDMI 2 /  

USB Media

Secondary Source

Allows the user to set the secondary priority source if content ceases on the 

primary source input.

AV / DP / HDMI 1 /  

HDMI 2 /  

USB Media

Software Update 

Allows the user to issue a software update through the USB media port when  

 available.

Yes / No

Auto Source Switching

Содержание XTREME XHB553





























Отзывы:

Нет отзывов