11 of 35
ISSUED: 07-28-06 SHEET #: 202-9156-15 (2014-04-09)
Insert two 1/4-20 x 12 mm screws (
L
) into holes indicated below for desired display orientation. Tighten all screws
using 4 mm allen wrench (
R
).
Choose hole pattern as shown in fi gure 10. Attach
hook plate (
B
) to back of display using four M4 x
12 mm screws. Tighten screws using a phillips
screwdriver.
10
Attaching Display with VESA 100 Mounting Pattern
• If screws don't get three complete turns in the display inserts or if screws bottom out and hook plate is still not tightly
secured, damage may occur to display or product may fail.
WARNING
M4 X 12 MM SCREWS
fi g 10
Attach hook plate (
B
) to display mount bracket (
A
).
B
A
11
12
2° Backward Tilt
5° Forward Tilt
No Tilt
© 2014, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
B
L
L
L
