9 of 35
ISSUED: 02-25-11 SHEET #: 009-9048-2 05-14-11
Begin with the shortest length screw, hand thread screw through multi-washer and display brackets (
B
) into
display as shown. Screw must make at least three full turns into the mounting hole and fi t snug into place. Do not
over tighten. If screw cannot make three full turns into the display, select a longer length screw from the baffl ed
fastener pack. Repeat for remaining mounting holes, level display brackets and tighten screws.
NOTE:
Spacers may not be used, depending upon the type of display.
Begin with the longest length screw, hand thread screw through multi-washer, display brackets (
B
) and spacer
in that order into display as shown. Screw must make at least three full turns into the mounting hole and fi t snug
into place. Do not over tighten. If screw cannot make three full turns into the display, select a shorter length screw
from the baffl ed fastener pack. Repeat for remaining mounting holes, level display brackets and tighten screws.
For Flat Back Display
For Bump-out or Recessed Back Display
6-1
6-2
DISPLAY
DISPLAY
MULTI-WASHER (
GG
)
MULTI-WASHER (
GG
)
SCREW
(AA,CC,EE)
UNIVERSAL ADAPTER
PLATE
(B)
SPACER (
HH
)
SCREW
(BB,DD,FF)
UNIVERSAL ADAPTER
PLATE
(B)
If you have any questions, please call Peerless customer care at
1-800-865-2112
.
If you have any questions, please call Peerless customer care at
1-800-865-2112
.
