1 of 2
ISSUED: 04-06-01 SHEET #: 200-9203-9 05-12-06
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
Used with specific
mounts only
HH
PARTS LIST
PART #
QTY.
DESCRIPTION
AA 201-1122
1
adapter bracket
BB 590-1115
4
1/2" OD screw insulator
CC 590-1121
4
.52 ID x .8 OD x .5 H spacer
DD 520-1152
4
M8 x 40 mm socket pin screw
EE 560-9646
1
security allen wrench
FF 540-9406
4
5/16 washer
GG 540-1002
4
.34 ID x .75 OD x .25 H spacer
HH 520-1063
4
M5 x 10 mm socket pin screw
Installation and Assembly - Plasma Adapter Bracket for
Panasonic
®
42" Plasma Screens
IMPORTANT! Read entire instruction sheet
before you start installation and assembly.
Parts List
Some parts may appear slightly different than illustrated.
Model: PLP PAN42
AA
CC
BB
EE
DD
FF
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
GG
GG
DD
FF
AA
DETAIL 1
BB
*Place four .52 ID x .8 OD x .5 H spacers (CC) inside recesses in back of plasma. Attach adapter plate (AA) to back of
plasma using four M8 x 40 mm socket pin screws (DD), four 5/16 washers (FF), and four screw insulators (BB) as shown in
figure 1 and detail 1. *Note: For Panasonic
®
TH42PA2OUP and TH37PA2OUP plasmas, place four .34 ID x .075 OD x .25 H
spacers (GG) inside recesses in back of plasma. Attach adapter plate (AA) to back of plasma using four M8 x 40 mm socket
pin screws (DD) and four 5/16 washers (FF) as shown in figure 1.1 and detail 2.
Tighten M8 screws (DD) using 4 mm allen wrench (EE).
DD
DD
FF
BB
AA
CC
Plasma
(cut out)
fig. 1
fig. 1.1
AA
DETAIL 2
Plasma
(cut out)
DD
GG
FF
FF
AA
CC
This product is UL Listed. It
must be installed by a qualified
professional installer.
R
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
WARNING
