4 of 16
ISSUED: 08-30-13 SHEET #: 180-9051-1
Model:ADS100-A252
FCC ID: 2AAW2ADS100-A252
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Model:ADS100-T8
FCC ID: 2AAW2ADS100-T8
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
17. Avoid overloading electrical outlets or extension cords which otherwise could result in electric
shock or
fi
re.
18. To avoid electric shock, never stick anything in the slots on the case or remove the cover.
19. This product is intended for indoor use only.
20. The apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Important Information
• Never use this product in an aircraft or a medical facility. It can cause interference or an
undesirable effect.
• The use of this product in the following locations may result in an abnormal audio output (noise,
etc,).
º
Near a refrigerator or metal structure.
º
In a cluttered room, causing potential blocked wireless signals.
• This product has been tested and manufactured to comply with each country’s safety rules.
However, there is no guarantee that interference will not occur in some installations. If
interference happens, decrease the distance between the product and receiving antenna.
• Optimal use of this product is for in-room/multi-room applications with a range of up to 140 ft.
(43m) away line-of-sight (LOS). This distance is reduced slightly when objects like walls and
fl
oors are in the transmission path.
• Any changes or modi
fi
cations not expressly approved by the manufacturer of this device could
void the product warranty.
• This equipment must be installed and operated in accordance with the provided instructions.
End users and installers must be provided with installation instructions and Transmitter operating
conditions for satisfying RF exposure compliance.
• This device should be used only as speci
fi
ed within this manual to meet RF exposure
requirements. Use of this device in a manner inconsistent with this manual could lead to
excessive RF exposure conditions.
Unit Care Recommendations
To clean, use a soft, dry cloth only. Do not use water or other cleaning products as they may cause
electrical failure or damage the surface of the product.
