5 of 8
ISSUED: 07-25-11 SHEET #: 090-9202-5 07-16-13
Attaching Adapter Plate Assembly to Screen
To prevent scratching the screen, set a cloth on a fl at, level surface that will support the weight of the screen. Place
screen face side down. If screen has knobs on the back, remove them to allow the adapter plate assembly to be
attached. Place adapter plate assembly (
B
) on back of screen.
Choose hole pattern as shown in detail 1.
FOR DISPLAYS WITH FLAT BACKS:
Attach adapter plate assembly (
B
) to display using four 12mm screws
(
F
) as shown in fi gure 4.1.
FOR DISPLAYS WITH RECESSED BACKS:
Attach adapter plate assembly (
B
) to display using four 25mm
screws (
G
) and four spacers (
H
) as shown in fi gure 4.2.
• Tighten screws so adapter plate assembly is fi rmly attached. Do not tighten with excessive force. Overtightening
can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to
become detached.
Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
• If screws don't get three complete turns into the screen inserts or if screws bottom out and plate is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
VESA 100mm
VESA 75mm
VESA 75mm VESA 100mm
DETAIL 1
4
B
B
G
H
F
fi g. 4.1
fi g. 4.2
