4 of 8
ISSUED: 07-25-11 SHEET #: 090-9202-6 2020-03-09
D
D
E
E
A
A
A
A
Apply four rubber pads (
D, E
) to bottom of column
assembly (
A
) as shown below. Attach column
assembly (
A
) to mounting surface with a maximum
thickness of 3".
Skip to step four.
1
Clamp Installation Method
Remove clamp assembly from column assembly
(
A
) as shown in figure 1.1. Remove mounting plate
from grommet assembly (
C
) and attach to column
assembly (
A
) with four M6 x 8 mm screws using
4mm allen wrench (
I
) as shown in figure 1.2.
Apply four rubber pads (
D, E
) to bottom of column
assembly (
A
) as shown below.
1
2
3
Grommet Installation Method
fig. 1.1
fig. 1.2
M6 X 8 MM
SCREWS
M6 X 8 MM
SCREWS
CLAMP
ASSEMBLY
MOUNTING
PLATE
A
C
Drill a 7/16" (11mm) dia.
hole through mounting
surface with a maximum thickness of 3".
Place
column assembly (
A
) on mounting surface and
secure using grommet assembly (
C
).
