background image

3

2014-06-20   #:009-9085-2.1  (2014-07-28)

Heavy

(13mm)

Do not begin to install product until you have read and understood the instructions and warnings contained in 

this user guide.  Always use an assistant or mechanical lifting equipment to safely lift and position equipment.  

This product must be installed onto flat, hard, level surface to prevent tipping. The cart or stand is not affixed or 

secured to the floor, and may therefore tip over and/or fall if screen and/or stand is shaken or hit. Displays must 

be removed before moving cart. Not recommended for use in areas with heavy traffic. This product is intended 

for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Screws must 

be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the 

Maximum Load Capacity. Be careful not to pinch fingers when operating the mount. For support please call 

customer care at 1-800-865-2112. 

 WARNING

To properly tighten screws: Tighten until screw 

head makes contact, then tighten another 1/2 

turn. Do not overtighten screws.

1

2

+1/2

4

3

Symbols

ENG

WARNING

ENG

Display center.

ENG

x3

Screws must get at 

least three full turns 

and fit snug.

ENG

Do not overtighten screws.

ENG

Tools Needed for Assembly.

ENG

Содержание DS-C555-4X2

























Отзывы: