SOUND REINFORCEMENT
CONTROLLED RADIATION
ACOUSTIC RESEARCH
CONTROLLED RADIATION
User’s Manual
UPTURNED T
series
SOUND REINFORCEMENT
ACOUSTIC RESEARCH
5
3.3 PSUTBASE/A
The active subwoofer
PSUTBASE/A
with 12” reflex loudspeaker with
Neodymium magnet was purposely designed for the formation of active
stack systems with PSUT8xx column elements (figure 6).
A plug-in socket and butterfly hinges are provided on the top in order to
accommodate various column elements.
It has a powerful DSP (24 bit/96 kHz) on board on a stereo amplifier with
800+800 W switching technology, one channel of which is used to pilot
the column elements above it. The internal DSP has 4 standard default
presets for each of the possible active stack configurations and the desired
timbre (see paragraph 4.9).
3.4 PSUT1
The
PSUT1
is a small loudspeaker system fitted with one single 4” full-range
transducer with Neodymium magnet and 16 Ohm impedance.
It was designed for fixed installations, for diffused sound reinforcement in stores,
coffee lounges, museums and exhibitions. However, it is also very suitable
for touring events such as audio installations for musical performances (the
concept of many small speakers is highly fitting for spacial sound applications
with multi-channel technologies).
A number of PSUT1 can be screwed to each other to form clusters of up to 4
elements that can be differently directed individually by means of an optional,
special accessory (STD-PSUT124). Alternatively they can be wall-mounted to
the desired angle by means of the STD-WUT1 swivelling bracket. All the PSUT1
units are protected from low frequencies by a passive high-pass filter. Use of
classic spring connectors (red/black) ensures fast and easy wiring.
Figure 6. PSUTBASE/A with PSUT8TE column hooked on top
of PSUT8-ST70 stand holder (active stack)
Figure 5. PSUTBASE/A, back and front view
Figure 7. PSUT1 “one-module” micro-loudspeaker system
Figure 8. Two clusters consisting of 2 and 4 PSUT1 modules respectively,
complete with wall-mounting accessories
