Pg. 6
Pg. 6
Pg. 7
Pg. 7
6. Make sure the seat is tight enough so
that you can’t twist it out of alignment. Pull
the seat clamp handle away from the seat
post and slide the seat up or down to adjust
it. Move the clamp handle inward toward
the seat post so it is held tight by the clamp.
If necessary, tighten the clamp by twisting
the clamp handle clockwise while in the un-
clamped position. Then, fold the handle in
toward the seat post. This should require a
fair amount of force to ensure the seat post
is held tight. If necessary, the clamp can be
further tightened with an allen key when in
the clamped position. Make sure the seat
is not set with the vertical maximum height
marks above the clamp.
7. PLEASE NOTE – The pedals are marked
“L” for Left and “R” for Right. Using the
wrench provided in the tool kit, attach and
tighten the pedals. The left pedal is at-
tached by turning it counterclockwise and
the right pedal is tightened by turning it
clockwise.
3
