PEDAL COMMANDER PC17-BT, Руководство по установке

Страница: 5 / 48

3
Installation Instructions
1 -Turn off ignition
2- If your vehicle has keyless entry, keep the key
fob at least 35 ft. (10m) away from the vehicle
(the signal can give power for your system). Wait
5 minutes to give everything time to power down.
3- Locate your accelerator pedal assembly plug
connection.
4- Remove the plug on your gas pedal.
5- Plug male and female connectors into their
coordinating plugs on the gas pedal. Make sure
the both plugs “click” into place.
6- Make sure cables are tucked in place so they
do not effect or endanger your driving.
7- Route the Pedal Commander to where you
can access easily.
8- Use the included alcohol wipe to clean the
area where you would like to mount the bracket.
9- Apply velcro to the bracket and cleaned area.
10- Put the Pedal Commander into bracket and
you’re done!
If you unplug the gas pedal too soon, you will
receive a check engine light because the vehicles
computer still has power and has detected a
sensor unplugged.
If you are visiting a dealership[ for routine
maintenance, you do not need to unplug Pedal
Commander, just turn off and tuck it out of sight.
If you are visiting a dealership for an issue
or warranty repair, REMOVE THE PEDAL
COMMANDER FIRST. Pedal Commander will