Pecunia PC 800, Руководство по эксплуатации

Страница: 13 / 20

Commissioning
1. Machine unpacking
Unpacking the machine and check what was delivered.
1.
2. Insert the connecting cable
Connect the cable to the device and to a suitable power source.
2.
3. Switch on the machine
Switch on the machine at the main switch. After the power is switched on,
the machine will do the self test. All functions and sensors of the machine will
be tested automatically.
3.
4. Insertion of banknotes, starting detecion
Insert the banknotes left-aligned in the hopper and pay attention to the be-
low shown comment „correct banknote insertion“.
4.
Correct banknote insertion
4. Adjusting of hopper guide
Adjust the hopper side guide that
the banknotes are adjusted loose
and in center of the hopper.
1. Stacking banknotes
Stacking the banknotes as parallel
as possible.
2. Stepping banknotes
Stepping the orderly banknote
bundle.
3. Inserting banknotes
Insert the stepped bundle of
banknotes with highest banknote
ahead on the hopper.
Important note to 3.):
Take care not to push the banknotes down when inserting in the hopper. The banknotes should be placed carefully,
without any pressure.
en
013