Peco 56651201, Руководство оператора, Страница: 8 / 54

8
Suspension Lockout (cont.)
3) Install (2) 1/2” Bolts through the 1/2” holes on the
inside suspension brackets on each side. See Figure C.
4) Install (1) 1/2” Serrated Nut on the 1/2” Bolts and run
them down a few inches. See Figure D.
5) Install the last set of 1/2” Serrated Nuts backwards
onto the each 1/2” Bolts and run them down past the end
of the bolts. See Figure E.
6) Run the middle set of Serrated Nuts down until the
end of the bolts are touching the outer suspension
brackets. Then turn 1/2 a turn. See Figure F.
Figure D
Figure C
Figure F
Figure E