Peco 54131501 Скачать руководство пользователя страница 2

2

GRASS COLLECTION SYSTEM

TABLE OF CONTENTS

SECTION                               PAGE

 
 

Safety  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2

 

Safety Alert Symbols - - - - - - - - - - - - - - - - - - - - - - 3

 

Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

 
I    INTRODUCTION AND DESCRIPTION - - - - - - - - - - - - 5
 

Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

 

Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

II   INSTALLATION FOR USE - - - - - - - - - - - - - - - - - - - - - 6
 

Preparation Of Mower - - - - - - - - - - - - - - - - - - - - - 6

 

Side Frame Bracket Installation - - - - - - - - - - - - - - - 7

 

Rear Frame Bracket Assy Installation - - - - - - - - - - - 8

 

Mount Arm Assy Installation - - - - - - - - - - - - - - - - - 9

 

Exhaust Deflector Installation - - - - - - - - - - - - - - - - 10

 

Exhaust Diverter Installation - - - - - - - - - - - - - - - - - 11

 

Lower Mount Tube Installation - - - - - - - - - - - - - - - 12

 

Upper Frame Assy Installation - - - - - - - - - - - - - - - 13

 

PTO Drive Assembly - - - - - - - - - - - - - - - - - - - - 14-15

 

Drive Assy and Belt Installation - - - - - - - - - - - - - - - 16

 

Top Assy To Upper Frame Assy Installation - - - - - - - 17

 

Inlet Installation - - - - - - - - - - - - - - - - - - - - - - - - - 17

 

Hinge Kit Assy Installation - - - - - - - - - - - - - - - - - - 18

 

Even Bag Fill Adjustment - - - - - - - - - - - - - - - - - - - 18

 

Bag Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - 19

 

Bag Assembly Installation - - - - - - - - - - - - - - - - - - 19

 SECTION                              PAGE

 
 

Blower Cone Installation - - - - - - - - - - - - - - - - - - - 20

 

Boot Kit Installation - - - - - - - - - - - - - - - - - - - - - 20-21

 

Length of Hose Adjustment - - - - - - - - - - - - - - - - - 22

 

Upper Hose Installation - - - - - - - - - - - - - - - - - - - - 22

 

Lower Hose to Blower Cone Installation - - - - - - - - - 22  

 

Lower Hose to Boot Installation - - - - - - - - - - - - - - - 22

 

Impeller Blade Removal/Replacement - - - - - - - - - - 23

 

Wiring Harness Installation - - - - - - - - - - - - - - - - 24-25

 

Weight Kit Installation - - - - - - - - - - - - - - - - - - - - - 26

 

Exploded Views & Parts List - - - - - - - - - - - - - - - 27-39

 

Overall Parts List - - - - - - - - - - - - - - - - - - - - - - - - 40

 

Safety Decals - - - - - - - - - - - - - - - - - - - - - - - - - - 41

III  OPERATING INSTRUCTIONS - - - - - - - - - - - - - - - - - - 42
 

General Safety - - - - - - - - - - - - - - - - - - - - - - - - - 42

 

Operation & Tips On Mowing - - - - - - - - - - - - - - - - 42

 

Disengagement Of The PTO Assembly- - - - - - - - - - 42

 

Unloading The Collection System - - - - - - - - - - - - - 42

IV  MAINTENANCE - - - - - - - - - - - - - - - - - - - - - - - - - - 42-43
 

Maintenance Checklist - - - - - - - - - - - - - - - - - - - - 43

 

Lubrication - - - - - - - - - - - - - - - - - - - - - - - - - - - - 43

V   PARTS AND SERVICE - - - - - - - - - - - - - - - - - - - - - - - 43
 

Parts And Service Information - - - - - - - - - - - - - - - - 43

 

Torque Specifications - - - - - - - - - - - - - - - - - - - - - 44

 

Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - 45

SAFETY

1. 

  Read the operator’s manual carefully and familiarize yourself with the proper use of your attachment. Do not allow

        anyone who is not acquainted with the Safety Instructions to use your attachment.

2.   

Know the controls and how to stop them quickly. READ THE OPERATOR’S MANUAL!

3.   

Do not allow children to operate the machine. Do not allow adults to operate it without proper instruction.

4.   

Be especially watchful of children and pets entering into the area while operating.

5.   

Keep your eyes and mind on your machine while mowing or operating your attachment. Don’t let others distract

       you.

6.   

Do not attempt to operate your machine when not in the driver’s seat.

7.   

Always shut off blades and engine when emptying the container.

8.   

Stop machine, shut off deck attachment, set parking brake, shut off engine and remove ignition key before 

       removing clogs, removing or replacing hose, boot, blower cone, or performing any maintenance.

9.   

Mow across the face of slopes (not more than 10 degrees); never up and down the face.

10. 

It is recommended that the container be emptied when half full while operating on slopes. Start mowing on slopes

       when the container is empty.

11. 

Inspect your lawn and remove any foreign objects before mowing. Never deliberately run the mower across any 

       foreign object.

12. 

Wear hearing protection.

13. 

Wear eye protection to prevent debris from getting into your eyes.                                                         

2017 (v1.0)

Содержание 54131501















































Отзывы: