E. Connect Pebble to Power (and turn on at wall)
F
. Only do this step if your first blinkup failed otherwise skip to step H
–
Tick legacy button (some phones
will require legacy blinkup mode)
G. Press
“
Clear Wireless Configuration
”
button &
before 3 second timer runs out
- Place Pebble on top of
phone screen.
The sensor on underside of pebble must be on phone screen to read signal from phone
H. Wait 10-15 seconds until phone screen stops flashing then watch the lights on Pebble
I. Remove pebble from phone
J. If pebble flashed
ORANGE
– clearing is successful
If the pebble flashed
RED
and/or
GREEN
it has not been
successful go back to step D