7
Tour™ Series
450/700
Bass Amplifiers
Congratulations on the purchase of your new Tour Bass amplifier from Peavey®. The Tour series is a class leader in power.
The Tour series features class A/B power amplifiers with patented SmartRail™ and DDT™ technologies. This technology gives
these amps massive dynamic power in a lightweight package, without introducing any switching distortion or delay. Each amp
features DC protection, an efficient parallel cooling system and a two-speed cooling fan. But that's not all. These amps contain
an analog octave divider which allows the user to synthesize a note one full octave below the note you are playing. Wrap all this
up with a constant Q, 9-band, graphic equalizer and the Peavey reputation for quality, and you couldn't ask for anything else.
Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line voltage
supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit.
Each product feature is numbered. Refer to the front panel diagram in this manual to locate the particular features next to its
number.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.
FEATURES:
• Bypassable 9-band graphic equalizer with push-button bypass
• Patented SmartRail™ technology
• Patented DDT™ (Distortion Detection Technique) technology
• Analog Octave Divider with footswitchable bypass
• Buffered Effects Loop
• Speakon® combination 1/4" Speaker Jacks
• Two input jacks for active & passive basses
• Pre and Post Gain controls
• Bright and low-cut switches
• Low & High Shelving EQ
• Contour Control
ENGLISH
VENTILATION: For proper ventilation, allow 12" clearance from the nearest combustible surface.
Make sure that all vents are not blocked and air can flow freely throught the unit.
