Peavey SSE 10, Технические характеристики, Страница: 2 / 12

2
Radiation angle measured at 6 dB
point of polar response:
500 Hz to 1.6 kHz:
Horiz. 125˚ ± 25˚
Vert. 130˚ ± 15˚
1.6 kHz to 5 kHz:
Horiz. 105˚ ± 20˚
Vert. 75˚ ± 30˚
5 kHz to 16 kHz:
Horiz. 95˚ ± 25˚
Vert. 65˚ ± 10˚
Directivity factor, Q (Mean):
7.19 ± 6.07
Directivity index, Di (Mean):
8.09 dB ± 2.01 dB
Transducer complement:
Low frequency section:
Premium-grade 10" woofer
High frequency section:
Peavey 14XT
™
titanium diaphragm
compression driver
on a 90° x 60° constant directivity horn
Box tuning frequency:
Low frequency section:
78 Hz
Harmonic distortion:
1% rated power
Second harmonic:
100 Hz: 0.43%
1 kHz: 0.07%
Third harmonic:
100 Hz: 0.58%
1 kHz: 1.02%
10% rated power
Second harmonic:
100 Hz: 2.28%
1 kHz: 0.40%
Third harmonic:
100 Hz: 0.97%
1 kHz: 2.02%
Electro-acoustic crossover frequency
(internal passive):
2.1 kHz
Impedance (Z):
Full range:
Nominal: 8 Ω
Minimum: 6 Ω
Input Connection:
1 four-pin Neutrik
®
Speakon
®
in parallel
with 1 two-position terminal strip
Enclosure materials and finish:
Trapezoidal, dado-joined, 12 mm 9-ply
Birch finished with a textured acrylic
polyurethane, with a full-length metal
grille covered with acoustical-grade grille
cloth. Available in black, white or natural
finishes.
Mounting provisions:
(6) 3/8"-16 threaded mounting
suspension points (three each top and
one each side and back). Use only
forged shoulder machinery eye bolt,
Mil Spec MIL51937-3.
(1) 1/4"-20 threaded mounting point
on back bottom for angle adjustments.
(4) 1/4"-20 threaded mounting
points on bottom to accommodate use
of VersaMount
™ 70 adjustable
mounting bracket.
(4) 1/4"-20 threaded mounting points.
DO NOT suspend this unit upside
down using the VersaMount system.
Dimensions (H x W x D):
Front:
19.63" x 15.09" x 12.12"
498 mm x 383 mm x 308 mm
Rear:
19.63" x 11.09" x 12.12"
498 mm x 383 mm x 308 mm
Net Weight:
29 lbs. (13.2 kg)
Frequency response
This measurement is useful in determining
how accurately a given unit reproduces an
input signal. The frequency response of
the SSE 10 is measured at a distance of 1-
meter using a 1 Watt (into the nominal
impedance) swept-sine input signal. As
shown in figure 1, the selected drivers in
the SSE 10 combine to give a smooth
frequency response from 80 Hz to 17 kHz.
Directivity
Beamwidth is derived from the -6 dB
points from the polar plots (see figure 3),
which are measured in a whole space
anechoic environment. Q and Directivity
Index are plotted for the on-axis
measurement position. These
specifications provide a reference to the
coverage characteristics of the unit and
provide insight into proper placement and
installation in the chosen environment.
The blending of the components of the
SSE 10 exhibit a desirable beamwidth and
directivity (figures 3 and 4) suitable for
sound reinforcement applications.
Power handling
There are many different approaches to
power handling ratings. Peavey rates this
loudspeaker system’s power handling
using a full-range form of the AES
Standard 2-1984. Using audio band 20 Hz
to 20 kHz pink noise with peaks of four
times the RMS level, this strenuous test
signal assures the user that every portion
of this system can withstand today's high
technology music. This rating is contingent
upon having a minimum of 3 dB of
amplifier headroom available.
Harmonic distortion
Second and third harmonic distortions vs.
frequency are plotted in figures 5 and 6 for
two power levels. Ten percent (10%) of
rated input power and either one percent
(1%) of rated input power or 1 Watt,
whichever is greater. Distortion is read
from the graph as the difference between
the fundamental signal (frequency
response) and the desired harmonic. As an
example, a distortion curve that is down
40 dB from the fundamental is equivalent
to 1% distortion.
Mounting
Caution: Before attempting to suspend or
mount this speaker, consult a certified
structural engineer. The speaker may fall
due to improper installation, resulting in
serious injury and property damage. DO
NOT suspend or mount any other product
or device from this enclosure. The
maximum enclosure angle is 45°. Use only
Grade 5 hardware or better. All associated
rigging is the responsibility of others.
Architectural and Engineering
Specifications
The loudspeaker system shall have an
operating bandwidth of 80 Hz to 17 kHz.
The nominal output level shall be 95 dB
when measured at a distance of a meter
with an input of 1 Watt. The nominal
impedance shall be 8 Ohms. The
maximum program power handling shall
be 400 Watts with a peak power input of at
least 800 Watts and a minimum amplifier
headroom of 3 dB. The nominal radiation
geometry shall be 90˚ in the horizontal
plane and 60˚ in the vertical plane. The
outside dimensions shall be 19.63" high
by 15.09" wide by 12.12" deep. The weight
shall be 29 lbs. The loudspeaker system
shall be a model SSE 10.
3 + 2 YEAR LIMITED WARRANTY
N NO OT TE E:: For details, refer to the warranty
statement. Copies of this statement may
be obtained by contacting Peavey
Electronics Corporation, P.O. Box 2898,
Meridian, Mississippi 39301-2898.