background image

Chapter 4 - Introduction to NION 

 

18 

Version 1.6.1.0 

September 30, 2010 

 

So

 

me text to force a page break in Word but remain invisible 

Description 

NION    (n. nee-on) is a programmable digital audio processing node designed for professional 
and commercial audio and communications applications. 

The internal processing core is supported by a wide range of features including MediaMatrix’s 
scalable I/O architecture, a modular I/O scheme that supports a variety of optional plug-in 
cards for maximum versatility.   

Each of the module bays supports 8 simultaneous analog audio channels, while the integrated 
CobraNet port provides further channels, depending on the model. 

NION is built on an embedded Linux architecture designed for stable, efficient and robust 
performance. Low-latency audio across all I/O ports makes NION perfect for performance 
audio projects, in addition to applications where a large amount of audio processing is 
required.  

Multiple NIONs can be managed using NWare, a Windows-based program that works with 
multiple nodes across an Ethernet network. Additional support for third party control and 
SNMP management tools is included.   

An intuitive front panel interface features an LCD display, soft buttons and rotary encoder to 
enable access to common system functions. Additional control interfacing is provided by both 
RS-232 and RS-422/485 ports, while a configurable GPIO system allows interfacing with hard 
contacts and logic systems. 

Note:

 The front panel is fitted to all NION models apart from the NION nE. This model is 

managed using the web interface and NWare. 

 

Features 

 

ƒ

 

Floating point DSP Engine with 6 DSP 
chips (NION n6) or 3 DSP chips (NION 
n3, NION nX) 

ƒ

 

Front panel interface with intuitive user 
input controls (n3, n6 and nX models 
only) 

ƒ

 

World-famous MediaMatrix audio 
algorithms 

ƒ

 

Robust Linux embedded system 
controller 

ƒ

 

96 channels total audio I/O (NION n3, 
NION n6) or 80 channels total audio I/O 
(NION nX) 

ƒ

 

Integrated flash-based storage 

ƒ

 

32 bits processing engine 

ƒ

 

Supports optional hard-disk storage 
systems 

ƒ

 

24 bit conversion 

ƒ

 

Windows configuration and control client

ƒ

 

X-DAB bus (NION n3, NION n6) 
supports up to 448 bi-directional audio 
channels 

Note:

 It is possible to exceed the 448 

channel limit, but it is not recommended. 
Testing has shown that using a greater 
number of channels can produce 
unexpected results. 

ƒ

 

Full support for SNMP network 
management tools 

Содержание MediaMatrix Nion































































































Отзывы: