4
appropriate slope-rates from 6 dB to
48 dB per octave in 6 dB increments
¥ Delay lines
: 5, 50, and 200 ms, plus
3D position calculating delays, from 1
to 16 outputs
¥ Diagnostics
for the system (compiled-in)
¥ Diagnostics
for the system (non-
compiled)
¥ Dip panels:
a graphic object for a
control area, label, message, etc.
¥ Dynamics: AGCÕs
,
compressors
,
duckers
,
expanders
,
GAP Ambient
Level Sensors
ª
,
noise gates
, and
limiters
¥ Equalization filters: all-pass filters
,
band-pass filters
,
CD horn lift
,
graphic EQÕs
,
high-pass filters
,
low-
pass filters, parametric filter sets
,
shelving filters
, and
tone controls
¥ Error indicators
for digital errors
¥ Hardware failure indicators
¥ Labels
: graphic areas to type in any
type of label, banner, etc.
¥ Level controls: attenuators
with and
without trim control (limits);
cross-
faders
;
distribution amplifiers
with 2
to 16 outputs
; multi-channel
attenuator groups
from 2 to 16
channels;
On-Off switches
;
panning
attenuators
from 2 to 5 channels;
ramps
with adjustable ramp level
change, ramp time, and ramp rate
¥ Logic controls:
Boolean
with 2, 4, or 8 inputs
RPN: base integer RPN
,
base logic
RPN
,
base % RPN
,
control inverter
,
dual flip-flop
,
event counter
, or
flip-
flop
functions
¥ Meters: LED
with tiny and large
signal-presence or overload indication,
¥ Peak
and
RMS
meters in 4
appearances with parameter controls
¥ Mixers
from 2 to 64 inputs and from 1
to 16 outputs
¥ Presets
: up to 25 system-wide with
more possible
¥ Program launchers
to launch other
programs from within MWare 3.0
¥ RoomLink
room combiners, using
either automixers, mixers, or mixers
with delay, for 3 to 15 rooms
¥ Routers
: from 1 to 32 inputs and from
1 to 32 outputs, with or without
¥ Processor
preconfigurations for 4
Peavey speaker systems
¥ Sub-presets
: up to 25 for individual
child windows with more possible and
schedulable with a built-in event timer
¥
System mute to mute all outputs
simultaneously
¥ Test functions: DC-voltage
generator
,
frequency-response
probe
,
I/O probe
,
pink-noise
generator
,
signal probe
,
sine-wave
generator
, and a
white-noise
generator
¥ Title blocks
: a graphic area to type in
any type of title, etc.
¥ Via
function to allow a signal to loop
back up the signal chain without
creating feedback oscillation
¥ Wave file players
for 32, 44.1, and
48 kHz system sample rates at 100%,
50%, and 25% of that sample rate
Notes:
(1) New devices may be created
and stored by the user in these
libraries.
(2) Any control parameters of any
of the above devices may be
controlled via the control ports on
the BoB or CAB I/Os, and via
third-party control software with a
properly configured interface port.
Other software packages not offering the
stability, security or flexibility of these
operating system and design/control/
diagnostics packages shall not be
acceptable.
The MM-760nt Mainframe system shall
have the following front-panel controls and
connectors: Front door and keyboard
locks, system power and reset switches;
power and HDD LEDs; AT keyboard and
PS2 mouse connectors. On the rear
panel, it shall have a Euro-style AC cord
connector, a DB-25 parallel connector, a
PS2 keyboard connector, a PS2 mouse
connector a DB-15 video connector, and
two COM port DB-9 connectors for COM 1
and COM 2.
The MM-760nt Mainframe shall have a
400-Watt PS/2 universal power supply,
UL, CSA, and CE listed. It shall operate
on AC power at either 50 or 60 Hz +/- 5%,
from 100 to 120 VAC or 200 to 240 VAC
+/-10% auto-selecting depending on the
source voltage. The power supply shall
consume no more than 920 Watts and
produce no more than 3128 BTU/Hr. at
115 VAC fully loaded, or consume no
more than 1150 Watts and produce no
more than 3910 BTU/Hr. at 230 VAC fully
loaded. It shall draw a maximum in-rush
current of no more than 80A at 115 VAC
and no more than 40 A at 230 VAC.
The MM-760nt Mainframe shall be 6.97"
(17.70 cm) high by 19" (46.26 cm) wide by
19.03" (49.02cm) deep and requires a
24"-deep rack. It shall weigh 41 lbs.
(18.63 kg). It shall be finished in grey
powder-coat painted steel. It shall be
supplied with the following accessories: a
detachable AC cord, rack slides, keys for
the front door and keyboard lock,
Microsoft Windows NT 4.0 CD, Pentium II
SBC, or equivalent, or better manual, and
drivers for the 10/100BaseT fast Ethernet
board and PCI video board.
The MM-760nt Mainframe shall be in
compliance with the standards of and
listed by UL, CUL, CE, and FCC part 15,
A. The mainframe system shall be the
Peavey MediaMatrix MM-760nt.
Note:
Microsoft
¨
Windows NT
¨
4.0 is
a registered trademark of Microsoft
Corporation, and Motorola
¨
is a registered
trademark of Motorola
¨
, Inc. Pentium II
¨
is
a registered trademark of Intel. CobraNet
ª
is a trademark of Peak Audio, Inc.
