10
P
P FF C
C 3
3 FF O
O O
O T
T S
S W
W II T
T C
C H
H
The optional Ecoustic PFC 3 footswitch offers tremendous‚ hands-free control over the effects built into the
Ecoustic 112 & 110. A perfect addition for the those critical performances!
M
Mo
od
de
e S
Se
elle
ecctt ((4
44
4)) a
an
nd
d M
Mo
od
de
e LLE
ED
D ((4
45
5))
The PFC 3 footswitch (optional) operates in two modes: EFX Select mode and Preset Select mode. Pressing
the Mode Switch (44) selects between the two modes. The active mode is indicated by the Mode LED (45).
Illumination of the LED indicates EFX Select Mode; non-illumination indicates Preset Select Mode. Controls
and indicators perform different functions relative to the active mode.
P
Prre
esse
ett S
Se
elle
ecctt M
Mo
od
de
e ((4
44
4))
In this mode‚ all three switches control effects presets. Their corresponding LEDs indicate which preset is
active. Once desired settings are achieved utilizing the effects controls on the front panel‚ double-click
one of the Preset switches (46‚ 48 or 50) to store the settings. For a detailed explanation on creating and
storing presets‚ refer to the Tweak Features section on the next page.
Note: When entering the EFX select mode‚ the current preset will remain active.
P
Prre
esse
ett 11 ((4
46
6))
In this mode‚ Preset 1 (46) mutes and un-mutes the signal completely. The Mute LED (47) will illuminate
when the signal is muted.
P
Prre
esse
ett 2
2 ((4
48
8))
Preset 2 (48) toggles between two effects and their respective settings. This button may be used as an
on/off switch if one of the settings has no effects active. To use the Modulation LED (49) as a status
indicator‚ the OFF (or lower setting) should be made with the LED dark and the ON (higher setting) made
with the LED illuminated.
P
Prre
esse
ett 3
3 ((5
50
0))
Preset 3 (50) toggles between two reverb and delay settings. As with effects settings‚ this switch may be
used as an on/off switch for reverb and delay. Both functions change simultaneously when this switch is
depressed.
