If the default LCD message display is present (e.g. DM 112 and 01: EDM ), then push in the "Push-to-Select"
knob to bring up the menu, which will display the first choice of " Recall preset ".
1. If you have selected " Recall preset " to select a different preset, then push the "Push-to-Select" knob to be able
to rotate through the preset choices.
An arrow symbol will appear at the left hand margin on the second line.
You can now rotate the "Push-to-Select" knob to access the other preset choices. Once the desired Preset is dis-
played, push the "Push-to-Select" knob in and it will be loaded
2 Delay - adjustable from 0 to 15 msec.
Rotate knob to adjust the delay amount, push to select the chosen delay amount and engage it.
The delay will be stored, and the menu will revert back to the " Recall Preset " message line.
3. Polarity
Rotate the "Push-to-Select" knob to select either " Direct " or " Inverse ".
Push the "Push-to-Select" knob in to save the change.
The Polarity will be stored, and the menu will revert back to the " Recall Preset " message line.
4. Bass
This allows a +/- 6 dB boost or cut tied to a hinge point set by the current preset.
Each preset has a different hinge point for the Bass and Treble, so experimentation with the different presets in
conjunction with the tone controls will yield a wide variety of available EQ curves.
Rotate the "Push-to-Select" knob to choose the amount of boost or cut in 1/2 dB increments from + 6 dB down
to - 6 dB. These tone changes occur on top of an existing factory EQ preset.
Push the "Push-to-Select" knob in, and the tone setting will be stored, and the menu will revert back to the "
Recall Preset " message line.
5. Treble
Same as for the Bass menu.
6. Saving Your Menu Changes
Once all menu items have been selected or changed, and the LCD screen has reverted to the menu default mes-
sage, the " Recall Preset " option, you can then rotate the knob to select the “ Save Preset “ option, and save the
modified set of preset parameters using a name of your choice (limit 16 characters total).
If you selected " Save Preset ", then the LCD display now shows the label
" EDIT NAME " on the first line and a blinking cursor at the first position of the naming field on the 2nd line in
the LCD.
Rotate the "Push-to-Select" knob to select the alphanumeric character desired. Up to 16 characters can be used
for the name. Push the "Push-to-Select" knob to enter the first selected character.
After the first character is entered, the blinking cursor will move to the next character in the line, where up to 16
alphanumeric characters can be entered.
The "Push-to-Select" knob will have to be pushed 16 times to get to the end of this portion of the " Save Preset "
process.
Once all the characters are entered, a message asking “ Save, are you sure? ” will display, rotate the "Push-to-Se-
lect" knob till the “ Yes ” answer is bracketed.
Push the "Push-to-Select" knob and the preset will be stored, and the menu will revert back to the " Save Preset "
menu line.
If you select “ Cancel ”, then the menu will revert to the " Save Preset " option.
At that point, you can rotate the "Push-to-Select" knob and select another menu choice, or start the “ Save Preset
