Peavey CS 1200H, Руководство пользователя

Страница: 14 / 20

14
S SE ET TU UP P IIN NS ST TR RU UC CT TIIO ON NS S
S Stte erre eo o O Op pe erra attiio on n
1. Set A AM MP P M MO OD DE E switch to S ST TE ER RE EO O.
2. Set the A and B channel A AM MP P FFU UN NC CT TIIO ON N switches and to FFU ULLLL R RA AN NG GE E.
3. Connect the Left and Right program signal to the A and B channel inputs: and .
4. Connect the A and B channel speaker outputs and to the loudspeaker full range inputs.
1
2 3
4 5
7 8
B Brriid dg ge e M Mo od de e O Op pe erra attiio on n
1. Set A
AM MP P M MO OD DE E switch to B BR RIID DG GE E.
2. Connect the program signal to the A channel input .
3. Connect the loudspeaker across the two RED binding posts on the amplifier outputs . The A channel is positive
and the B channel is negative or between th 1+ and 2+ pins of the A channel Speakon connector (the 1+ positive
and the 2+ pin is negative).
1
4
9
7
T Tw wo o C Ch ha an nn ne ell P Pa arra alllle ell O Op pe erra attiio on n ((F Fu ullll R Ra an ng ge e))
1. Set A
AM MP P M MO OD DE E switch to S ST TE ER RE EO O.
2. Set the A and B channel A AM MP P FFU UN NC CT TIIO ON N switches and to F Fu ullll R Ra an ng ge e .
3. Connect the program signal to the A channel input .
4. Plug a short shielded cable into the A H HIIG GH H P PA AS SS S//FFU ULLLL R RA AN NG GE E output .
5. Connect the other end of the same cable to the B channel input .
6. Connect the A and B channel speaker outputs and . to the loudspeaker full range inputs.
1
2 3
4
6
5
7 8
4 2 6
8 7 9
1 5 3