112 PM
ª
Powered Floor Monitor
The 112 PM
ª
Powered Floor Monitor is a full range monitor enclosure with a 75-watt power amp and
four-band, graphic EQ. Its small package and light weight make it ideal for those familiar, Òclose
quartersÓ stages. Totally self-contained, the 112 PM requires only AC power and a signal feed from
your board to accomplish a roadworthy, feature-packed monitor system.
Thank you for purchasing the 112 PM Powered Floor Monitor. Please read the following features,
descriptions, warnings, and warranty information to better understand this unit and its safe opera-
tion.
FEATURES
¥ New, bullet-type HF device
¥ 12" Heavy-duty woofer
¥ Built-in 75-watt power amp
¥ Four-band EQ
¥ Metal corners and grille
¥ Rugged carpet covering
DESCRIPTION
1.Removable AC Power Cord
This receptacle is for the IEC line cord (included),
which provides AC power to the unit. Connect the
line cord to this connector and to a properly grounded AC
supply. Damage to the equipment may occur if an
improper line voltage is used (see voltage marking on
unit). Never remove or cut the ground pin of the line cord
plug. This unit is supplied with a properly rated line cord.
When lost or damged, replace this cord with one of the
proper ratings.
(For UK Only)
As the colours of the wires in the mains
lead of this apparatus may not correspond with the
colored markings identifying the terminals in your plug,
proceed as follows:
¥ The wire which is coloured green and yellow must be
connected to the terminal which is marked by the letter
E, or by the earth symbol, or colored green or green
and yellow.
¥ The wire which is coloured blue must be connected
to the terminal which is marked with the letter N, or
coloured black.
¥ The wire which is coloured brown must be connected to
the terminal which is marked with the letter L, or coloured
red.
ENGLISH
6
5
3
7
4
1
2
3
