Initial
Setting
Uni-Lock Footboard Angle Cam
Key Bolt
Drum Key
Heel Plate
Hinge
Hinge
Flat Head Screw
3-Piece Screw
Bottom Plate
Footboard
Fig. 9
Fig. 10
Fig. 8-A
Duo-Deck Footboard
The P-3000C features Pearl's patented Duo-Deck
Footboard, the world's first convertible Short / Long
Footboard.
To convert the Duo-Deck to a Long Footboard, turn the
pedal over and remove the four Flat Head Screws with the
provided Multi-Function Drum Key or Allen wrench (3mm)
as shown and remove the Heel Plate and the Hinge from the
Bottom Plate (Fig.9).
Lift the Footboard and remove the four 3-Piece Screws with
the provided Multi-Function Drum Key or Allen wrench
(3mm) as shown, and remove the Hinge from the Footboard
(Fig.10).
Footboard Angle Adjustment
The Footboard Angle can be adjusted by loosening the Key
Bolt on the Uni-Lock Footboard Angle Cam and adjusting it
to the desired angle (Fig.8-A). Re-tighten the Key Bolt to
secure the angle. A gauge on the side of the Angle Cam is
provided to reference Footboard Angle settings (Fig.8-B).
Long Footboard
Short Footboard
Fig. 8-B
Tip
Note
If the Beater is too far from the Bass
Drum Head, the Footboard can
touch the Hoop Clamp and cause
damage to the Footboard and/or the
Hoop Clamp. To prevent damage,
please refer to (Fig.7), and adjust the
Beater angle as shown.
The Duo-Deck is set at the factory in the Short Footboard setting.
Fig. 7
