B
B
A
A
Fig.16
Fig.17
If the Drive Shafts are extended too far, they will separate from the
Center Connecting Tube. Reassemble them with the dots aligned as
shown in Drawing (Fig.19).
Note
Connecting the Drive Shaft Assembly
Connect the ends of the Drive shaft (A) to the short
extensions (B) on the Main Pedal (Fig.16). Tighten the Key
Bolts with a Tuning Key in order of the top (Key Bolt 1) and
then the side (Key Bolt 2) and secure.
Use same method with (left) pedal (Fig.17). To ensure
proper connection of the drive shaft rotate the Hexagonal
Axle to have the flat surface of the short extension (B)
facing upwards to fit into Joint (Fig.17).
To adjust the length of the Drive Shaft Assembly, loosen the
Key Bolts on the Center Connecting Tube. Adjust the length
to your liking and make sure that both Drive Shafts are in
equal length. Re-tighten the Key Bolts to complete the
adjustment (Fig.18).
http://www.pearldrum.com
Products and specifications are subject to change without notice.
Printed in China
-1601-
Key Bolt 2
Key Bolt 1
Key Bolt 2
Key Bolt 1
Key Bolt
Fig.18
Fig.19
Fig.20
CAUTION
Periodically check all Allen Screws for tightness and
tighten them with the provided hexagonal wrench as
needed.
Periodically apply lube to all moving parts such as the
Chain, Cam Roller, Footboard Hinge, etc. for optimal
speed and extended life of your pedal.
Only use NiNjA Oil on NiNjA bearings.
Both the Belt and Chain Assemblies are interchangeable
on all Eliminator pedals to provide easy conversion from
chain or belt drive.
Optional Items
(sold separately)
・
Belt Assembly (BCA-250) / Chain Assembly (CCA-5)
The P-2052C / P-2052B Pedal features precision NiNjA
bearings for incredible speed and smoothness. To keep
them functioning at their maximum speed and
performance it's recommended that you apply genuine
NiNjA Oil at regular intervals (Fig.20).
・
Oil (OL-300)
Oil
Hexagonal Axle
