Pearl Malletstation EM1, Руководство пользователя

Страница: 13 / 20

13
Buttons
The buttons can send a variety of data, and all selections
can be sent simultaneously.
Faders
The faders can be set to send a CC message, or to send pitch
bend data. When set as pitch bend, it will automatically be
setup to auto-center. Change the number next to CC to
change the CC message being sent. The MIDI channel can also
be assigned per fader.
Preset Select Mode
Turn preset selection mode of the 4 internal presets
on or off. When on, the buttons will select one of the
four on board presets (buttons 1-4 recall presets 1-4).
This is a device wide setting, and not per preset.
Program Change
Set a Program Change message that the button will send.
Channel
Select the channel any MIDI messages assigned to
the button will send on.
Note Number
Set a MIDI note number for the button to send.
(Sends 127 when pressed, 0 when released)
Bank Select
Set Bank Select messages that the button will send.
Refer to the destination’s MIDI implementation for
the values needed for the MSB and LSB.
CC
Set a controller change (CC) number for the button to
send. (Sends 127 when pressed, 0 when released)
4.1.3 The Buttons and Faders
Here you can define the behavior of the buttons and the
faders. Select a button or fader to edit by clicking on it.
The control being edited will be highlighted in blue.
malletSTATION EDITOR (continued)
C