1. GENERAL INFORMATION
Before using the product carefully read the information contained
in this instruction manual, the manual should be kept for future
reference.
This manual is part of the essential safety requirement and must
be retained until the product is finally decommissioned.
The customer, in case of loss, can request a copy of the manual
by contacting the manufacturer or their agent, specifying the
type of product data shown on the label of the machine (see 2.3
Marking)
Any changes, alterations or modifications made to the product or
part of it, not authorized by the manufacturer, will revoke the “CE
declaration” and warranty.
This appliance should not be operated by children younger
than 8 years, people with reduced physical, sensory or mental
capacities, or inexperienced people who are not familiar with the
product, unless they are given close supervision or instructions
on how to use it safely and are made aware by a responsible
person of the dangers its use might entail.
Children must not play with the appliance.
It is the user’s responsibility to clean and maintain the appliance.
Children should never clean or maintain it unless they are given
supervision.
Do not use in ponds, tanks or swimming pools or where people
may enter or come into contact with the water.
Read carefully the installation section which sets forth:
- The maximum permissible structural working pressure
(chapter 3.1).
- The type and section of the power cable (chapter 6.5).
- The type of electrical protection to be installed (chapter 6.5).
1.1. Symbols
To improve the understanding of the manual, below are
indicated the symbols used with the related meaning.
Information and warnings that must be observed,
otherwise there is a risk that compromise personnel
safety.
The failure to observe electrical information and
warnings, could damage the machine or compromise
personnel safety.
Information and warnings that must be observed,
otherwise there is a risk that compromise personnel
safety.
Notes and warnings for the correct management of the
machine and its parts.
Operations that could be performed by the final
user. After carefully reading of the instructions, is
responsible for maintenance under normal conditions.
They are authorized to affect standard maintenance
operations.
SELF PRIMING JET PUMPS
JCCH - JCCQ
JSCH - JSCQ
INSTALLATION AND OPERATING INSTRUCTIONS
Operations that must be performed by a qualified elec-
trician. Specialized technician authorized to affect all
electrical operations including maintenance. They are
able to operate with in the presence of high voltages.
Operations that must be done performed by a
qualified technician. Specialized technician able
to install the device, under normal conditions,
working during “maintenance”, and allowed to
do electrical and mechanical interventions for
maintenance. They must be capable of executing simple
electrical and mechanical operations related to the
maintenance of the device.
Indicates that it is mandatory to use individual
protection devices.
OFF - Operations that must be done with the device
switched off and disconnected from the power supply.
ON - Operations that must be done with the device
switched on.
1.2. Authorized operators
The product is intended for use by expert operators divided into
end users and specialized technicians. (see the symbols above).
It’s forbidden, for the end user, carry out operations which must
be done only by specialized technicians. The manufacturer
declines any liability for damage related to the non-compliance
of this warning.
1.3. Warranty
For the product warranty refer to the general terms and
conditions of sale.
i
OFF
ON
i
OFF
ON
i
OFF
ON
i
OFF
ON
i
OFF
ON
i
OFF
ON
i
OFF
ON
i
OFF
ON
i
OFF
ON
i
OFF
ON
