6.4. Selecting the temperature-range (0,1° / 1°)
High resolution:
0,1°C or 0,1°F
Low resolution:
1°C or 1°F
Over range indication will be shown in the display, if measured
value exceeds the measuring range. If you intent to make
measurements above 199,9°, change the resolution to 1°.
6.5. DATA-HOLD
Press the "HOLD"-button to freeze the present measuring value.
The "HOLD"-symbol will be shown in the display. Press the
"HOLD"-button again to return to normal use.
6.6. MAX-HOLD
Press the "MAX"-button to freeze the max. measured value in the
display. The "MAX"-symbol will be shown in the display. Press the
"MAX"-button again to return to normal use.
6.7. LCD-Backlight
1.
Turn the unit on by pressing the "POWER"-button.
2.
Press the "BACKLIGHT"-button for switching on the backlight.
3.
Press the "BACKLIGHT"-button again for turning off the
backlight.
6.8. Using the Laser pointer beam
For using the laser pointer beam make the following steps:
1.
Turn the unit on by pressing the "POWER" button.
2.
Press the
-button
-23-
