60
5.9. Temperature measurements
Warning:
To avoid electric shock, disconnect both test probes from any
source of voltage before making a temperature measurement.
To avoid electric shock, be sure the thermocouple has been
removed before changing to any other measurement function.
1.
Set the function switch to “TEMP °C/°F” position.
2. Pres the push button MODE to select °C or °F.
3. Insert the multi-function adaptor in the input socket for
V/
/CAP/Hz%/Temp
(+) and
COM
(-) for temperature
measurements.
4. Insert the K-type thermocouple into the multi-function adaptor,
making sure to observe the correct polarity.
5. Touch the temperature probe head to the part whose
temperature you wish to measure. Keeps the probe touching the
part under test until the reading stabilizes (about 30 seconds).
6. Read the temperature in the display. The digital reading will
indicate the proper decimal point and value.
5.10. DC Current measurements
Warning:
To avoid electric shock do not measure DC current on any circuit
whose voltage exceeds 600V DC/AC.
Caution:
Do not make current measurements on the 10A scale for longer than
30 sec. Exceeding 30 sec. may cause damage to the meter and / or
the test leads.
Содержание 3349
Страница 1: ...Bedienungsanleitung Operation Manual True RMS Digital Multimeter PeakTech 3349 3350 ...
Страница 75: ...75 ...
