3. If in range 2mH, please short test leads and measure
lead inductance and then subtract the inductance from
the value measured.
4. Avoid measuring small inductor in high range, or the
accuracy is not guaranteed.
6.6. Temperature measurements
Warning!
To avoid electric shock, disconnect both test probes from
any source of voltage before making a temperature
measurement.
1. If you wish to measure temperature set the function
switch to the °C-range
2. Insert the temperature-probe to the input sockets mA (-)
and COM (+)
3. Touch the Temperature probe head to the part whose
temperature you wish to measure. Keep the probe
touching the part under test until the reading stabilizes
(about 30 seconds).
4. Read the temperature in the display. The digital reading
will indicate the proper decimal point and value.
Warning!
To avoid electric shock, be sure, that the thermocouple has
been removed before changing to another measurement
function.
-49-