PeakTech 1140, Руководство по эксплуатации

Страница: 13 / 26

PeakTech
®
1140
8
4. General Operation
4.1 Set_up
Press “SETUP“ key. Then, Display as follows.
You will be set up next parameter.
Contents :
Output Mode : Continuous, Single, Repeat/Gap
Config.
System info
It is selected by next procedure
1) Press only “Number ( 1 ~ 4 ) “.
2) Select one of above Menu with “Rotary Encoder “and “ ENTER “ key.
4.1.1 Contents
Press “1” key ( or Use with “Rotary Encoder “ and “ ENTER “ key ) at “SETUP” mode .
Then, Display as follows
You will be set up next parameter.
●
1.DAB_DMB(T) : Current Supply ( default setting )
4.1.2 Output Mode
You will be set up next parameter .
● 1.DAB_DMB(T) : Current Supply ( default setting )
4.1.2 Output Mode
Press “2” key ( or Use with “Rotary Encoder “ and “ ENTER “ key ) at “SETUP ” mode .
Then, Display as follows
[ SETUP]
1. CONTENTS 2. OUTPUT MODE
3. CONFIG. 4. SYSTEM INFO
[CONTENTS]
DAB_DMB(T) -- Only Supply
[OUTPUT MODE]
1. CONTINUOUS 2. SINGLE
3. REPEAT /GAP