background image

Rotate  the  [DISPLAY  DIMMER]  dial to  adjust  the  brightness  of  the  display (0%-

100%) as per your preference. 

 

Night Light On/Off

     

Press  the  top  [LIGHT]  button  to  turn  on  the  night  light,  press  the  top  [LIGHT] 

button again to completely turn off the night light. 

 

Night Light Dimmer 

Rotate the [LIGHT DIMMER] dial to adjust the brightness of the night light (10%-

100%) as your preference. 

 

USB Charging Port 

There is a USB port at the back of the clock, the maximum output current is 1. 0A, 

it can be used to charge your device like cellphone, etc. 

Note: 

It  is  not  recommended  to  use  this  USB  output  to  charge  high-power  electronic 

devices such as electric fans, hair dryers, etc. 

 

Regular Time and Military Time Conversion     

In non-set mode (clock time normal display mode), press the [12/24H] button once 

to switch the time format between 12H (Regular Time) and 24H (Military Time). 

The PM indicator will light to indicate the PM time while the clock is in Regular Time. 

 

Safety & Maintenance                 

This electric clock may represent a hazard for children. Keep this clock out of reach 

of children to avoid risk of shock or possible choking hazard from small parts or 

batteries. 

A soft paper towel may be used to clean the clock. Do not use corrosive cleaners 

or  chemical  solutions  on  the  clock.  Keep  the  clock  clean  and  dry  to  avoid  any 

problem. 

Содержание MHP3235






Отзывы: