PEAKEEP Night Light Digital Alarm Clock
User Manual
(MHP3235)
Getting Started
1.
Remove the battery compartment cover, located at the lower right corner of
the back, properly align and insert 2* AAA (1.5V) batteries (not included the
box) following the +/- in the battery compartment, replace cover.
2.
Connect the provided adapter to the DC 5V power jack of this unit, and plug
the adapter into an AC power outlet.
Note:
1.
Backup batteries maintain date, time and alarm settings, however, they do not
power the display, nor trigger the alarm during power interruptions.
2.
For better performance, replace batteries every 6 months. When you replace
the batteries, do not disconnect AC plug from AC outlet, otherwise current time
and alarm will be initialized.
3.
Dispose of used battery promptly, keep the battery out of the reach of children.
Set Date and Time
Press and hold the [SET] button for 2 seconds, located on the back of the clock,
to enter the date and time SET MODE. Once in date and time SET MODE the
preference you are currently setting will blink on the clock.
To adjust the currently selected (flashing) item, press and release the “ +” or “ -
“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the next
preference. The preference set order is as follows:
CALENDAR YEAR
CALENDAR MONTH
CALENDAR DAY
CLOCK HOUR
