background image

x

Thank you for purchasing the Peak High Speed PHS-450.  Peak laminators are designed to give you professional, 
high quality results, quickly and easily.  Please take a few minutes to read through this important document as 
any 

damage caused to your laminator by user error is not covered under warranty.

Using the temperature and speed control

Temperature Control

These buttons are used for increasing or decreasing the temperature setting.  

The temperature can be increased or decreased by a unit of 1

o

C when they are pressed.

(Please note the temperature control chart below is for a guide only and other factors 

such as room temperature and thickness of document can affect the laminator). 

 

The desired temperature will be shown on the display, to show the actual temperature of the 

rollers press the temperature measure button

The temperature range is from 0 -150

o

C (if the laminator reaches a temperature of more than 160

o

C, 

an over heating circuit will cut off the system automatically).  

Never laminate small, 

cut-up pieces without 

using a Lifejacket

®

 or you 

risk jamming and damaging 

your laminator (this will 

not be covered under warranty).

What is a ‘Lifejacket®’?

The Lifejacket® is a highly durable patented product made from Teflon® that should be used when laminating 

cut-up, odd shaped pieces (such as shapes, letters, signs as shown above) to prevent damage to your laminator 

and potential jamming.  

Why use a Lifejacket®?

.  Protect your laminator from jamming 

.  Extend the life of your laminator by using the Lifejacket® - stops adhesive seeping onto the rollers

.  Eliminate repair bills as this product keeps your laminator working at an optimum level

.  Available in A4, A3 and A2 sizes to protect documents of all sizes

Ask your supplier for more details.

Speed Control  

These buttons enable the laminator speed to be controlled manually.  The speed ranges from 

1-9.  The speed will increase/decrease by one unit when the buttons are pressed. The motor 

will only run once the laminator reaches a temperature of more than 60

o

C.

Laminating pouch thickness

Paper type

Setting without a 

Lifejacket® / carrier

Setting when using a 

Lifejacket® / carrier

Temp 

o

C

Speed

Temp 

o

C

Speed

A2/A3

A4

A2/A3

A4

150 to 200 micron total 

(75 + 75 per side up to 100 + 100 

per side)

Copy paper (80gsm)

115

3-4

7-9

135

3-4

6-7

Photo paper (120gsm)

115

3-4

7-9

135

3-4

5

Card (200gsm)

115

3-4

7-9

135

3-4

5

250 to 360 micron total

(125 + 125 per side up to 180 + 180 

per side)

Copy paper (80gsm)

115

3

4-6

135

3

5

Photo paper (120gsm)

115

3

4-6

135

3

5

Card (200gsm)

115

3

4-6

135

3

4

500 micron (maximum)

(180 + 180 per side up to 250 + 250 

per side)

Copy paper (80gsm)

115

2

2-3

135

1

2-3

Photo paper (120gsm)

115

2

2-3

135

1

1-2

Card (200gsm)

115

2

2-3

135

1

1-2

Отзывы: