PCAN-MicroMod Evaluation - User Manual
26
7.
Under Windows, start the FUJITSU FLASH MCU Pro-
grammer (FMC16LX).
8.
Select
Set Environment
in order to check that the indicated
serial port is corresponding to the actually used one.
Confirm with
OK
.
9.
Do the following settings:
Target Microcontroller
: MB90F497/G
Crystal Frequency
: 4 MHz
10.
Use the
Open
button behind the
Hex File
field to select the
firmware file that shall be used for upload.
11.
Start the transfer sequence by clicking on
Full Operation
(D+E+B+P+R)
.
The process takes approximately one minute. At its end a
message is shown that confirms the proper sequence.
