background image

4 IN 1 RECHARGEABLE HEATER FAN/DEFROSTER 12V

Product Code: N84KA

WELCOME

This  product  has  been  carefully  engineered  and  manufactured  to  give  you  dependable  operation. 
Please read this manual thoroughly before operating your new product as it contains the information 
you need to become familiar with its features and obtain the performance that will bring you continued 
enjoyment for many years. Please keep this manual on file for future reference.

IMPORTANT

PRIOR TO USE, READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND INSTRUCTIONS INCLUDED 
IN THIS INSTRUCTION MANUAL, AND THOSE PUBLISHED BY YOUR VEHICLE BATTERY MANUFACTURER 
AND  MANUFACTURER  OF  ANY  DEVICE  INTENDED  TO  BE  USED  WITH  THIS  UNIT.  RETAIN  THESE 
INSTRUCTIONS FOR FUTURE REFERENCE.

Safety Instructions

• 

Use this product with 12-Volt DC systems or cordless operation. Do not connect to 6 or 24-Volt  

 

DC Batteries. (Only use in 12V DC sockets rated at 20 Amps or higher!)

• 

This unit has a built in lead acid battery. Although the unit arrives partially charged from the factory,  

 

it should be fully charged before first use.

• 

Recharge the battery after each use or every 2 months to maximize the life of the battery.

• 

Do not operate this device or place this unit near flammable materials.

• 

Do not use the product when charging the battery with AC or DC adapters as it may cause damage  

 

to the AC adapter and/or the product.

• 

The vehicle voltage must be present in the cigarette lighter, even when the ignition is switched  

 

off and the ignition key removed, so that the device may be operated. If this is not the case with  

 

your vehicle, a specialist garage can make a bypass for continuous operation.

• 

Please ensure 12V DC operation power cord is fully extended prior to and during use, to prevent  

 

any overheating issues.

• 

The fan heater is not suitable for installation internally but only for installation on the dashboard or  

 

foot well.

• 

Please do not operate the fan heater while you are driving.

• 

The AC adapter is for charging only. The unit cannot be operated by using the AC adapter. 

• 

Observe minimum distance from other devices (at least 20 cm)

• 

Always keep the openings of the fan heater uncovered

• 

Protect the fan heater from damp.

• 

Always unplug when the device is not being used.

• 

Do  not  open  the  unit.  There  are  no  user  replaceable  parts  in  this  unit.  Doing  so  will  void  the  

 

warranty.

• 

This  device  contains  sealed,  non-spillable  lead-acid  battery  and  must  be  disposed  properly  

 

when  the  device  is  discarded.  Contact  your  local  government  recycling  authority  for  proper  

 

disposal methods. Failure to follow instruction may cause damage or explosion hazard.

LOCATION OF CONTROLS:

1.  Air Vent
2.  LED work light
3.  LED light on-off switch
4.  AC/DC charging jack 
5.  Main Power switch “I-O” of fan heater
6.  Cool/Heat Mode Switch
7.  Operator buttons
8.  Display
9.  Charging indicator (Red)
10.  Heater/fan power indicator (Green)
11.  Divert to external power operation
 

indicator (Yellow)

12.  Adjustable stand
13.  12V DC socket
14.  Power jack for 12V      DC operation
15.  12 V DC power cable with 15A in-line fuse
16.  AC charging adapter
17.  DC charging cable
18.  Clock battery compartment 

Cordless operation

To use the fan heater in battery mode, it must be fully charged before use. Please charge the product 
fully immediately after every use. Observe the safety instruction here.

You can charge the battery with AC/DC charging jack via the charging cable or with 230V~ AC via the 
mains adapter. For this, the mains adapter or charging cable must be connected to the charging jack (4) 
and a power source, The red LED indicator light (9) is lit during the charging process.

As soon as the battery is fully charged, disconnect the fan heater from the mains.

Attention: Do not operate the heater during the charging process. To operate the fan heater, you must 
remove the mains adapter or DC charging cable

DC Operation

To use the fan heater in 12V     DC mode, connect the fan heater via the cigarette lighter socket in 
your vehicle. For this use the DC power cable (15) for continuous operation and power jack (14). The 
ignition must be switched on in order to permit a period of use of up to one hour.

Use of the fan heater

Place the fan heater on the dashboard behind your vehicle’s windscreen or in the foot well with aid of 
the stand (12). Connect the power plug to the 12V     DC cigarette lighter socket or use the fan heater 
in battery mode.

CR2022

CLOCK

BATTERY

1
2

3

4

5

6

7

8

9

10

11

15

17

16

18 12 13

14

Отзывы: