PCAN-Router Pro FD – User Manual
31
7
Configurable Data Logging
In addition to the programming examples, the PCAN-Router Pro FD
is delivered with a ready-to-use firmware for tracing CAN data.
The CAN messages can be recorded on the internal eMMC memory
or on an inserted SD card which are both accessible via the USB
connector. A text file is used to configure the six CAN channels and
data logging features.
Features
Separate configuration of the 6 CAN channels
•
Setting the CAN specification to 2.0 A/B, CAN FD ISO, or
CAN FD Non-ISO
•
Setting the nominal and data bit rates
•
Enabling or disabling the Listen-Only mode
Recording of data frames, error frames, or data and error frames
Setting of the trace mode and maximum file size
Setting of the storage medium for saving the trace files
Configuration of events for starting and stopping the recording:
•
Powering the device
•
By pressing the
Log Off Card
button
•
By receiving a specific CAN message
Configuration of timeout events for stopping the recording or
shutting-down the device:
•
Data traffic has stopped
