PCAN-PCI – User Manual
17
Figure 8: Dialog box New transmit message
2.
Enter the ID and the data for the new CAN message.
3.
The field
Cycle Time
indicates if the message shall be
transmitted manually or periodically. If you want to transmit
the message periodically, you must enter a value greater
than 0. For a manual-only transmission enter 0.
4.
Confirm the entries with
OK
.
The created transmit message appears on the
Receive/Transmit
tab.
5.
You trigger selected transmit messages manually with the
menu command
Transmit
>
Send
(alternatively Space bar).
The manual transmission for CAN messages being
transmitted periodically is carried out additionally.
Tip:
Using the menu command
File
>
Save
the current transmit
messages can be saved to a list and loaded for reuse later on.
