8
V20-04-DC01
INSTALL SETUP
Ensure the clip located below the seat to the rear locks into place.
4.
Install the controller into the open slot on the arm of the chair
on the right side (if
user needed
can change to left side).
T
ighten
the
knob located under the armrest to
secure the controller in place.
5.
Connect the controller wire harness to the CPU wire harness. Take care the line up the
pins properly as arrow tip indicate so that they do not get bent, broken or damaged.
6.
Secure joystick controller knob
Slide joystick Controller into armrest
Note
Make sure connector pins “white arrow” to “white arrow” .
