Page 6
3.
Connect the supplied
¼” Teflon Tubing
to the
AIR IN
port. Connect appropriate
⅛
”
tubing, greater than 1m in length, to the generators
ZERO AIR
port.
Please note: Only
Copper or Stainless Steel tubing should be connected to the ZERO AIR port.
Copper /
Stainless Steel
tubing only
4.
Select the appropriate mains cable from the fittings kit and plug the
IEC 60320/C13
cable into the mains input at the rear of the generator.
Please note both 110V and 230V US cables have been supplied, ensure correct
mains cable is used to match the rating on the generators serial plate.
00-1266
CAUTION
04-1028/04-1029/04-1038/04-1039
