Peak Scientific Genius 1024, Руководство пользователя

Страница: 26 / 32

Page 26
Run Time Alarm
The Genius 1024 monitors the operating tank pressures, in this case the N2. When this
is at the set point, there is no alarm. Only when the pressure drops to a pre-determined
set point will the alarm be activated, indicating LOW pressure.
It should be noted that the Generator will continue to operate so long as it can
maintain pressure during these alarms.
Note: the buzzer may be temporarily silenced for approximately 90 minutes by
pressing the “MUTE” button on the front facia; the Alarm LED will remain lit.