Peak Pilates MVe Скачать руководство пользователя страница 7

Страница: 7 / 8

18. Slide the end of one Spring into its notch at the end of the flange of one of the Spring

Adjustment Sliders. Insert the Spring Retaining Pin.

19. Place an E-Clip so its legs engage the groove in the Spring Retaining Pin and either push

or tap down with the end of a tool until it snaps into place. Repeat for the other Spring and

Spring Adjustment Slider.

20. Place a piece of cardboard or other protective material on the floor and place the Chair on

its Seat.

21. Remove the Leveling Glides assembled to the Base through the bracket for the Foot Pedal

Bumpers.

22. Remove both Foot Pedal Bumpers by unscrewing the flat head screws which fasten the

brackets to the Base.

23. Replace the Leveling Glides.

24. Stand the Chair back on its Base.

Note: The new Split-Pedal includes a Bumper assembled to the vertical support for the Foot Bar.

25. Once completely reassembled, verify that the Foot Pedal can be moved from the Stacking

to the Exercise position and that the Release Pins fully engage the slots in the Striker Plates.

CAUTION: Never exercise with the Foot Pedal in the stacking position.

WARNING: Do not exercise on the Chair unless the Release Lever Pins are fully engaged in

the slots of the Striker Plates

Содержание MVe








